Loading... Please wait...

ETDS VIII 8-sample 3000 RPM Stand Alone Lab Homogenizer DCN/Design Village

Hover over image to zoom

  • ETDS VIII 8-sample 3000 RPM Stand Alone Lab Homogenizer DCN/Design Village
  • ETDS VIII 8-sample 3000 RPM Stand Alone Lab Homogenizer DCN/Design Village
  • ETDS VIII 8-sample 3000 RPM Stand Alone Lab Homogenizer DCN/Design Village
  • ETDS VIII 8-sample 3000 RPM Stand Alone Lab Homogenizer DCN/Design Village
  • ETDS VIII 8-sample 3000 RPM Stand Alone Lab Homogenizer DCN/Design Village
  • ETDS VIII 8-sample 3000 RPM Stand Alone Lab Homogenizer DCN/Design Village
  • ETDS VIII 8-sample 3000 RPM Stand Alone Lab Homogenizer DCN/Design Village
  • ETDS VIII 8-sample 3000 RPM Stand Alone Lab Homogenizer DCN/Design Village
  • ETDS VIII 8-sample 3000 RPM Stand Alone Lab Homogenizer DCN/Design Village
  • ETDS VIII 8-sample 3000 RPM Stand Alone Lab Homogenizer DCN/Design Village
Design Village
$169.99
SKU:
DV0301
Condition:
Used
Availability:
In Stock. Usually ships in 24 hours.
Shipping:
Calculated at checkout

 Product Description

ETDS VIII 8-Sample, 3000 RPM Lab Homogenizer
Cat No. DV 0301
Fully functional. Excellent condition.

Eight samples to homogenate? Do you have 10 seconds?


ETDS VIII
..Easy to clean
..Easy to maintain
..Small footprint
..Reliable
..High throughput
..Simple operation

FEATURES:
  • Eight head unit with 8 powerful and reliable Maxon 118798 DC Motors
  • Very high throughput if required
  • Can homogenize most samples in less than 30 seconds
  • Accepts the Homogenizer Disposable
  • Easy to clean
  • Easy to maintain
  • Small footprint
  • Reliable
  • Simple operation
  • Multispeed
  • Scale up from the Solo unit is simple – identical operation parameters
The System
The ETDS VIII is a stand-alone instrument designed to process a sample with the patented ETDS homogeniser disposable. The unit has been designed to provide consistent homogenisation whenever the unit is used.

The outer tube is a polypropylene injection moulding. A patterned finish has been applied to the inside bottom surface. This finish provides one of the grinding surfaces.

The grinding shaft is also a polypropylene injection moulding. A patterned surface has been applied to the bottom surface, this provides the other grinding surface.

The helix drive at the top of the shaft provides an auto aligning drive connection with the drive spindle.

The grinding shaft has several small slots at the base above the grinding disc. Fluid leaves the central void when the motor starts, returning as a sample fluid mixture through the slots when the motor stops. The slots act as coarse filters preventing large pieces of sample getting into the central sampling area. This helps to
prevent blockages in the sample tips used to remove the homogenate.

Homogenate can be removed with a pipette through the drive shaft without removing the cap.

Physical Specification
Weight 29.5 Kg
Dimensions 580mm wide, 405mm deep, 490mm high (suitable for fume cabinets)
Mains Power Universal AC Input
Safety Specification
Tested and Approved by CE, CSA, UL and CB
Performance
Homogenising Speed 3000rpm +/- 5% set at manufacture
Homogenising run time User adjustable with password protection
Cycle repeat time User adjustable with password protection
Homogenising force Set by spring 4.7N +/- 10% adjustable at build
Physical Specification
Material Wipe clean stainless steel and coated aluminium
Barcode Tube alignment feature to align barcode label
Post process Racks available for Tecan and other sample processors


MONEY-BACK GUARANTEE

 Find Similar Products by Category

You Recently Viewed...

 

newsletter


Copyright 2019 Arellon.com. All Rights Reserved.
 Sitemap | Bigcommerce Premium Themes by PSDCenter


Click the button below to add the ETDS VIII 8-sample 3000 RPM Stand Alone Lab Homogenizer DCN/Design Village to your wish list.